This four-sided square profile from Genesis protects the edge of mosaic, ceramic and other hard surfaces in wall and floor applications. The four-sided shape makes it ideal for mosaic and other small tile formats. This version is intended for a tile thickness of 10 mm and has a length of 2.5 metres. The finish is natural aluminium (untreated / mill finish).
Product & function
The profile is extruded from AA 6063 T6 aluminium and anodised according to DIN 17611. For outdoor applications, the manufacturer recommends a powder-coated finish.
Application & compatibility
The profile is intended for mosaic and small tile formats. Choose the version that matches the thickness of your tile, so that the top of the profile is flush with the tile surface. We do not supply corner pieces for this series. Cut the corner at a 45-degree miter; using a miter box will help you maintain a consistent angle.
Use & key points
- Choose the profile that matches the thickness of the tile.
- Apply tile adhesive over the area forming the edge of the tiling.
- Press the perforated mounting flange into the adhesive and align the profile. Secure mechanically if necessary.
- Apply additional adhesive over the flange so that it is fully embedded.
- Bed the tiles firmly. The tile surface should be flush with the top of the profile: the profile should not sit higher than the tile, but approximately 1 mm lower.
- Fill the joint completely.
Aluminium is sensitive to alkalis. Cement-based materials become alkaline when combined with moisture, so remove adhesive and grout residues from visible surfaces and ensure that the profile is fully embedded. In the event of chemical or mechanical loading, first check whether aluminium is suitable for the situation. No special maintenance is required. An oxide film can be removed with a standard polishing agent, but it will return. Damaged anodised finish can only be repaired by recoating.
Key features
- Extruded aluminium, AA 6063 T6 alloy
- Anodised according to DIN 17611
- No special maintenance required
- Mitered corners; no corner pieces for this series
Technical specifications
| Alloy |
Aluminium AA 6063 T6 / UNS A96063 |
| Anodising standard |
DIN 17611 |
| Natural oxide layer |
approx. 0.2 microns |
| Polished and anodised oxide layer |
5 microns |
| Mat finish oxide layer |
up to 20 microns |
| Powder-coated oxide layer |
100 microns |
Frequently asked questions
Which profile thickness do I need? The thickness of the profile matches the thickness of your tile. Measure the tile and choose the version that corresponds; the profile must not protrude above the tile surface.
Can this profile withstand moisture? Aluminium is resistant to normal moisture exposure in bathrooms and kitchens. However, be aware of fresh cement and grout residues: they become alkaline when combined with moisture and can damage the surface. Wipe them away before they have hardened.
How deep should the profile be embedded in the adhesive? The mounting flange should be fully embedded. After pressing it in, apply another layer of adhesive over the flange to ensure there are no voids behind it.
Can I cut this profile to size? Yes. Cut the profile with a fine-toothed saw and neatly finish the cut edge.
